My first boat building Project (not counting a couple of door-skin surfboards) was a Bolger Yellow Leaf pirogue, built from drawings in Bolger’s “Small Boats”.
31' L.O.A.
26' On-deck
Built at Roses Bay, NS
Finished off at Covey Island Boatworks
Teak deck, transom, and cabin
Hard pine planks on white oak frames
Bronze cast by Lunenburg Foundry
Self-steering
8 horse Sabb diesel
Hood design, Tor built, 40' centerboard yawl, mahogany on cedar double-planked, continually upgraded. Fun coastal cruiser and real head-turner. Yanmar 40hp, Hydralign feathering prop, Seafrost mech refrigeration, H/C pressure water, Raymarine Chartplotter & Radar, Simrad autopilot.
Boat is free to the right home, much work has already been done to this boat hull has been done with West system the hull is in very good condition it has two rebuilt 440 Chrysler engines new hydraulic steering recon props and shafts it needs the interior finished I have to let my dream go as hel
Plywood molds and ladder strongback for Jericho Bay Lobster Skiff free to someone that plans to build the boat. The boat is not available, just the molds. I am just finishing, have no use for them and would like to help out the next person.
Boat needs work on planking, frames, deck, coach roof, and mast. Have materials and some hardware. Sails include main, jib, and spinnaker; fair condition. Boat is on sturdy cradle; no trailer; located in southeast Michigan, near Ohio state line. More photos available.
I built this PT 11 nesting dinghy from the CLC kit over this past winter, to replace a 9'6" Nutshell pram I built a few years ago not from the kit (the kit is better...) It is a fabulous dinghy-rows like a dream, sails well and nests and unnests in minutes-much credit to Russell Brown and PT Wate
21’ long, 16’ beam (reduces to 8'5" for trailering), strip plank construction, 850lbs with all gear aboard, launched 2019, 3.5hp Tohatsu outboard, trailer. $9,500
Forward -Facing Rowing System by Gig Harbor Boat Works; Carbon fiber sliding seat on teak platform or, alternative fixed rowing seat and foot rest; Spacered inwales and outwales (rub rails) in teak; Teak stemhead with bronze fitting; Teak quarter boards; Brightwork in 2-part polyurethane; Brass s
Berkeley Eastman, designer of this wonderful mini-tug said, “It’s the most fun you can have without getting arrested!” And he was so right.