This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers. If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here.
(All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
Built from 1/4" strips of red and yellow cedar, David Samuelsson's Cosine Wherry looks quite pretty on a beach in British Columbia. David referred to the book "Rip, Strip, and Row" by J. D. Brown in his construction of this boat.
Odessa is a gaff-rigged L.F. Herreshoff-designed Buzzards Bay 14 (17′ LOA, 3-foot draft, 5′10″ beam) sloop launched June 8 at Clark Boat Yard in Jamestown, Rhode Island.The hull for “Odessa” was built by Graves Yacht Yard, Marblehead, Mass.
Jericho Bay Lobster Skiff, launched in August, 2020. My first boat build, built part time in my garage.Rigged with a 2021 Yamaha 25 HP. A light engine, only 126 lbs, reaches 25 mph. Nav lights, GPS-enabled VHF, Garmin 1400 GPS/Chartplotter, digital engine gauge.
Eric Weissberger and Scott Lloyd built this Karl Stambaugh–designed weekend skiff in somewhat more than that weekend, actually it was more than a year. VERBOATEN was built from the plans using stitch-and-glue methods on okoume plywood, and then giving the hull 3 coats of epoxy. Eric plans to us
After an extensive restoration by the Lewis family in Florida, the steamboat tender BARBASHELA returned to the Gulf Coast waters October 17, 2016. She was designed in the late 1870s by Captain T. P. Leathers of the steamboat NATCHEZ, and gifted to MS.
Eddie Peterman, age 14, indicated an interest in woodworking and building a boat. His first boat was a Sam Devlin design stitch and glue 8′ rowing pram that had a couple minor design changes.
Deborah A. Simmons of East Hartford, CT, built the ...
David and Benji Cantera, father and son, asked their friend, John Swain, a shipwright, to design and help them build a 10′8″ skiff, LEAPIN’ LENA. They covered the hull bottom, transom, and deck in marine plywood sheathed with Dynel cloth. They planked the hull in white cedar on white oak frames.
NEMAH features a stable, flat bottomed, sharpie type hull that can handle up to 3 passenger
10’ rowboat with aluminum trailer. Full cover and oars.
Asking $2,000
GROOTE BEER, has been in the US in the past for many years.
