If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
TITICAT is a 9-meter sailing catamaran designed with a modern style for the transport of tourists and to build in strip planking. It was designed to sail on Lake Titicaca (Bolivia).
The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82″.
The Great Alaskan is a very versatile inshore/offshore powerboat with a seaworthy semi-dory style hull. These fiberglass/wood stitch-n-tape boat plans give the builder the freedom to adapt the cuddy, pilothouse, and cockpit layout to his preference.
These completely new designs were developed at CLC in response to a growing constituency of skilled paddlers seeking waterborne sports cars for racing, exercise, or just plain fun.
Light and fast, a 20' tortured plywood, decked dayboat: both a double kayak and a single scull in one hull. Her 'midship' section is similar to Aleut kayaks.
The TX18 is an inverted vee boat, Hickman sled type designed for fishing the flats along the Gulf of Mexico or anywhere a shallow draft boat must go long distance in choppy seas.
The Lorna has a slim sweet hull for experienced paddlers.
NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.
A deep-V bottomed, open runabout built of plywood over sawn frames.
Construction: Plywood planking over sawn frames
Lofting is required.
Plans include 5 sheets.
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
Prowess was built in 1947 and in 1984 had a comprehensive 3 year restoration.
Cedar plank and mahogany boat built in 1950 number 12021.
This new catboat design from Arey’s Custom Boats is our fastest yet.
