Plans & Kits

Wood strip/epoxy plans and kits

Concept: The CCSF25 is a high performance offshore fishing and family boat, she has a classic running surface of 24 degree deadrise and 8.5' max beam. Wide chine flats for knocking down spray, integrated lifting strakes for high speed handling and directional control.

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise.

These completely new designs were developed at CLC in response to a growing constituency of skilled paddlers seeking waterborne sports cars for racing, exercise, or just plain fun.

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.

A thoroughly charming boat from the board of a highly respected designer, Eel exudes strength of character.

Construction: Strip, cold-molded, or carvel.

Alternative construction: Lapstrake.

Lofting required.

Plans include 4 sheets

A big, healthy, open skiff with sophisticated lines. Construction: Strip planking over sawn frames; double diagonal bottom. Alternative construction: Plywood lapstrake topsides. Lofting is required. Plans include 6 sheets

Construction — Glued lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area — Lug 83 sq. ft. Sloop 95 sq. ft.

SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof.

The idea was a boat that handles like a good racing dinghy, but is much easier to store and transport. Rooftop.