Oar / Paddle
The Open Boat
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been some adjustments to take care of this.
This 20′ cutter will prove challenging to build, but will reward your efforts with incomparable charm and grace.Atkin specifies traditional plank-on-frame construction.Construction: Carvel-planked over steamed frames.Alternative construction: Cold-molded or strip.Lofting is require.Plans include
Parker Marine Enterprises—Sea Bright 38Length Over All: 37′ 11”Beam: 10′ 6″Draft: 2′ 4″Displacement: 9,500 lbs, half-laden (approximate)Power: Yanmar 4JH4HTE (110 hp int/99 hp cont)Water: 200 gallonsFuel: 200 gallonsAccommodations: Sleeps four in double V-berth and two settee berths.
Cradle Boat Baby Tender II, for the newborn sailor.
When I first saw WoodenBoat Magazine’s boat design competition to design a modern wooden runabout, I was very excited. I’m sure most of the other competitors in this competition feel the same way.
Kingfisher’s shape was inspired by famous Chestnut Prospector. Hull width of 93cm, flat bottom and slim shape gives good stability and maneuverability. It is designed for crew of 2 with additional equipment (tents, fishing rods…).
D'ANNA is a 30' cold-molded evolution of the 29' Beals Island lobster boat, DIANA
The main priorities which lie at the base of the DP 14' design are: simplicity of construction, user friendliness (for single or double crew) and good performance - all of this with reasonable costs.
A classic boat built by the East End Classic Boat Society in Amagansett, NY in 2014.
This stunning 16' mahogany inboard runabout is model 202, the “Special Utility Boat.” Built in 19
SOLD APRIL 2026 - NO MORE INQUIRIES
International Penguin
2008 Bristol Seacraft Penguin
11'5" LOA