Plans & Kits

IRC cruiser-racer

MOTH, designed according to the rules of the Classic Moth Class, is a fast and enjoyable boat. It has a narrow hull, designed so as to minimize wet surface, is relatively stable and planes easily.

Cutter designed by John Hyslop in 1876. An early combination of English and American ideas, PETREL was designed according to the wave form theory.You’ll receive 2 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.The pl

The idea behind this design was to see how much boat can be squeezed out of a single sheet of plywood 4x8′ (1220 x 2440mm). The resulting boat is suitable for kids to paddle on ponds or very small lakes.

4.80 m Plywood stitch & glue solo canoe.

the Mark V 20 is a trailereble outboard powered cruiser.

Oceangoing carvel-planked cruiser with a choice of centerboard or ballast keel configurations.

Construction: Carvel planked over sawn frames.

Alternative construction: Strip.

Lofting is required.

Plans include 7 sheets.

A 12 ft. outboard-powered multipurpose jonboat.

“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.

Our Skerry™ is that rare boat combining excellent rowing and sailing qualities into one attractive craft. Sail when there's wind, row when there's not. You'll cover the miles either way.