Plans & Kits

The MAC 75 wa is a fast fishing boat easy to build.

Build the Babson 14 from scratch! Plans include three variations on the hull: sheet ply (like our kits), glue-lap-ply, power, suitable for up to a 2 horsepower outboard.Plans contain 16 sheets of drawings, full-sized mold patterns so no lofting is required (no offsets are included with the plans)

Lightweight, reasonably seaworthy recreational single with a sliding seat and outriggers.

Construction: Cold molded

Lofting is required

Plans include 5 sheets.

The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.

16ft Plywood stitch & glue touring canoe.

ROBERTS SPRAY 27 TRAILERABLE CRUISER You can build this boat in wood epoxy and other materials too.

The Eureka is a pretty, simple to build plywood canoe built in stitch and glue, (44lbs down to 34) and paddles nicely. Very comprehensive plans - a boatbuilding course in a book.

Designed as a cat schooner; both sails have big round poles at their leading edges. Considering the performance potential of this hull, this rig is appropriate. The stayless rig is clean and will be cheap to build with solid fir poles.

A 15' Inboard Plywood Powerboat

Accomodates 2-4 for daysailing, and has a small cuddy cabin. Construction: Carvel Planked over sawn frames. Alternative construction: Strip, or strip bottom with plywood sides. Lofting is required. Plans include 7 sheets.