Plans & Kits

Roberts 434 Wood Epoxy Sailboat

The classical hull shape of old wooden runabouts of the 70’s combines perfectly well with the use of marine plywood. This allows SILVER 55 to be in the same time elegant and simple to build.

Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.

Rustica 570 is a cabin motor boat ideal for coastal cruising and camping. It’s particularly suitable for river tourism in protected waters. The shallow V hull, semi-displacement, is designed for an outboard motor hosted inside the cockpit with a power range between 10 HP and 15 HP.

This schooner is designed to be able to cruise offshore with a crew of four people.
Here heavy displacement and built down hull will make for a comfortable motion

Based on the Donzi Sweet 16, this little treasure boasts a generous deep V at the transom allowing for smoother running and bad weather handling.

This retro styled powerboat was designed for weekend cruisers and fishing, her semi displacement hull offer seaworthy and sea kindly performance, good speeds with modest horsepowers.

A thoroughly charming boat from the board of a highly respected designer, Eel exudes strength of character.

Construction: Strip, cold-molded, or carvel.

Alternative construction: Lapstrake.

Lofting required.

Plans include 4 sheets

The success of the proven Chesapeake™ hull shape led quickly to demands for similar three-person designs. With a 700lbs payload and surprising speed.