If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A classic double paddle solo canoe. This hull design has been built in many versions, from a simple light weight fast cruising canoe, to a full decked version of bookmatched walnut veneer.
This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.
The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82″.
Light, lapstrake-planked open canoe for sailing or double-paddling. Construction: Lapstrake planking over steamed frames. Lofting is required. Plans include 4 sheets.
Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.You’ll notice the different stem patterns on plans page 5...
An oceangoing auxiliary cruiser featuring stout but simple carvel construction.
Construction: Carvel planked over steamed frames
Lofting is required
Plans include 5 sheets.
With the Polliwog, it is our intention to offer the amateur builder the opportunity to build a lightweight and strong dinghy or tender. Polliwog’s performance is crisp, clean and efficient – you won’t be disappointed.
A small daysailer/cruiser with berths for two. Construction: Plywood planking over sawn frames. Lofting is required. Plans include 8 sheets.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.
Lapstrake-plywood daysailer with a shapely wineglass transom, unstayed sprit rig, and wide, flat, keels for easy trailering.
Construction: Lapstrake plywood planking over steam-bent frames.
Alternative construction: Cold-molded or strip.
No lofting is required.
13' "Melonseed" daysailer. Okume marine plywood with fiberglass/epoxy skin. Home built 2023.
This gorgeous Bermudian Double Ended Yawl ‘La Vie en Rose’ was designed by Paul Gartside, built b
This beautiful, seaworthy head turner of a cruising boat was designed and built by the renowned w
