Plans & Kits

Dixi Dinghy plywood 3:1 dinghy

LITTLE CRAB is a smaller version of the Chesapeake Crab Skiff I drew several years ago.

TITICAT is a 9-meter sailing catamaran designed with a modern style for the transport of tourists and to build in strip planking. It was designed to sail on Lake Titicaca (Bolivia).

VOYAGER DS 655  WOOD / EPOXY PLANS & FULL SIZE FRAME PATTERNS

Austral’s design is an outgrowth of my 26' Wynfall design, intended to provide additional space below decks, including standing headroom. She is slightly heavier, longer and wider, and has more freeboard than her smaller sister.

Kingfisher’ II is was developed directly from Kingfisher. Hull shape was modified with with flatten side line and reduced height. Other hull dimensions remain the same, width of 93 cm, flat bottom and slim shape gives good stability and maneuverability.

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.

Waverunner 24 

A deep-V bottomed, open runabout built of plywood over sawn frames.

Construction: Plywood planking over sawn frames

Lofting is required.

Plans include 5 sheets.

The Unicat 2.4 is all about practicality and safety. Packing a 230kg load capacity, the Unicat is suitable for 3 adults, and the inverted vee hull is much more stable than conventional dinghies. The high freeboard also ensures a dry ride in most conditions.