Plans & Kits

Here is another little skiff inspired by a Chesapeake Bay working craft.

This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.

ZEN is a very simple 10 Foot boat (www.diecipiedi.it) particularly narrow and therefore unstable. It is not the right boat for a beginner but, in the hands of a good helmsman, it may be fast.

The plan has been designed according to the regulations of the class “10 feet”. So was born a simple, light and very fast plan.Start 30 has a double life.

Compromise sloop designed by N.G.

Based on Tom Gillmer and Iver Franzen’s New Moon (an enlargement on Gillmer’s Blue Moon), this sailing vessel is intended to be a stout, seaworthy, offshore-capable passagemaker, with an emphasis on the balance between comfortable sea-keeping and good sailing abilities.

The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it would be the fastest possible.

Construction — Glued lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area — Lug 83 sq. ft. Sloop 95 sq. ft.

Rifleman was intended as an economical planing hulled speedboat suited for coastal inshore fishing.
She is built of plywood and is intended for 15/20 hp outboard motors.

The idea behind this design was to see how much boat can be squeezed out of a single sheet of plywood 4x8′ (1220 x 2440mm). The resulting boat is suitable for kids to paddle on ponds or very small lakes.