If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two
Our Trawler 28 is a sturdy offshore trawler with a straight shaft inboard diesel. This makes the TW28 an ideal boat for a couple to live aboard or for a crew of 4 on vacation.
The CS-18 is an open interior design with the home builder in mind. It is designed for an above deck fuel tank and less aggressive flare in the bow. These features make this design an easier and faster build and at 18.5′, it will fit in most home garages.
This is a simple 8ft stitch and glue sail/row pram. It requires only 3 sheets of marine plywood and should be very fast, easy, and inexpensive to build. It should end up just over 80lb so easy to transport as well.
Bedard Yacht Design’s Ozona X Nesting Pram evolved from the hugely popular Ozona Pram and a significant demand from cruisers for a nesting dinghy, slightly larger.
The PUCK reflects the spirit of the original class which was to create a boat used in regattas but also suitable for coastal cruising, easy to carry and inexpensive.
A refinement of the traditional Swampscott working dory for recreational use.
Plans include nine different rigs.
Construction: Glued lapstrake plywood over sawn frames.
Alternative construction: Traditional dory construction.
No lofting required.
Roberts SPRAY 22 trailerable cruising sailboat you can build in wood epoxy using the plans and full size frame patterns.
Cape Henry 21 lapstrake plywood trailer sailer
SPHERA is a simple cruising boat, studied for the maximum ease of construction in relation to its size.
Cadenza was built in 2003 at Rockport Marine by shipwright John England from a design by L.
