Plans & Kits

Here is another little skiff inspired by a Chesapeake Bay working craft.

Round-bottomed, carvel-planked powerboat with two berths and a single 300-hp engine.

Construction: Carvel planked over steamed frames.

Alternative construction: Strip or cold-molded

Lofting is required.

Plans include 5 sheets.

The project, despite its small size, develops a discrete internal volume allowing to nr. 4 crew members to spend short cruises with good speed and pleasant navigation.The hull lines and the deck are to corner for simplicity of construction, and are harmonized with the hull volume.

Cradle Boat Baby Tender II, for the newborn sailor.

25′ LOA carvel-planked daysailer with small cabin. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 4 sheets.

During rise of the nautical tourism on east Adriatic coast in late 1980s, there was a lack in offer of smaller sailboats for day rent and sailing lessons.

Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.You’ll notice the different stem patterns on plans page 5...

Trailerable coastal cruising catamaran

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p

SPHERA is a simple cruising boat, studied for the maximum ease of construction in relation to its size.