Plans & Kits

Waverunner 24 - PLYWOOD Planing hull

Fine boatyard skiff or small harbor ferry. Construction is plywood planking over bulkheads. Lofting is required. Plans include 5 sheets

NEMAH features a stable, flat bottomed, sharpie type hull that can handle up to 3 passengers and a small outboard up to 5hp. Sides are ¼” plywood and the bottom is 3/8” plywood. A trussed gunnel rail insures hull stiffness.

This exquisite launch leaves little wake at five knots. Her plans show both cold-molded and plank-on-frame construction. Construction: Cold-Molded or Carvel planked over steamed frames. Alternative construction: Lapstrake. Lofting is required. Plans include 5 sheets.

Thank you for considering my plans for BOWLER, a “cruising” version of my TOP HAT launch. These boats are descended from Harry Bryan’s inspired Handy Billy design, which in turn can trace it’s origins back to William Hand's vee bottom designs from the early 20th century.

A stitch & glue tender that can be rowed, motored and that sails like a charm.

8 plank stitch and glue canoe.

Construction: Strip planked and glass/epoxy sheathed.

Alternative construction: Cold molded, traditional wood and canvas lapstrake plywood.

No Lofting required.

Plans include 4 sheets.

As featured in WoodenBoat issue #274, the Tombolo 28 is an iconic modern classic outboard-powered cruiser. The mission of the design dictates a maximum length under 30′ and a trailerable beam.

Shallow-drafted V-bottomed cruiser with cross-planked bottom & berths for three. Construction: Carvel planked sides over sawn frames; cross planked bottom. Alternative: Strip-planked topsides. Lofting is required. Plans include 7 sheets.