Plans & Kits

Commuter style launch with diesel inboard and a small cabin.

Chesapeake Light Craft’s Eastport Nesting Pram shares its hull with the popular stock Eastport Pram dinghy, a champion 7′9″ yacht tender that can carry a decent load, rows and tows with ease, and sails beautifully.

The Headwater TRANSPORT 9.9 is an easily Car-Topped Pram Dinghy with a constant deadrise 10 deg. V-bottom Planing Hull  with lifting chine strips.  Bow and stern seats provide level flotation if the hull is swamped, and also provide dry storage if watertight closures are installed. 

The Great Alaskan is a very versatile inshore/offshore powerboat with a seaworthy semi-dory style hull. These fiberglass/wood stitch-n-tape boat plans give the builder the freedom to adapt the cuddy, pilothouse, and cockpit layout to his preference.

Short handed cruiser-racer

Athey is a 15' open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 4, 6 and 9mm glued lapstrake plywood, she weighs just 65 pounds and is cartopped.

Techne is a pure double trapeze skiff, fast, exciting and for amateur boat building.

Accomodates 2-4 for daysailing, and has a small cuddy cabin. Construction: Carvel Planked over sawn frames. Alternative construction: Strip, or strip bottom with plywood sides. Lofting is required. Plans include 7 sheets.

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage is available up forward below the casting deck.

A new M80 has been launched in NL.
This tri was built by the ultimate wooden boat builder, Eef, a legend now 81 years has built several wooden multihulls is very happy with his new creation.
For more information on the M90, the M80 and M60 visit: