Trover
Very simple workboat for outboard motor power. Suits 8 to 30 hp motors,carry up to six persons, can be built longer or shorter as required.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Very simple workboat for outboard motor power. Suits 8 to 30 hp motors,carry up to six persons, can be built longer or shorter as required.
Construction — Glued lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area — Lug 83 sq. ft. Sloop 95 sq. ft.
Good speed and sea keeping ability with low impact & noise. 50hp outboard or inboard diesel.
4.80 m Plywood stitch & glue touring canoe. Only two plywood sheets are needed!
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
An oceangoing V-bottomed auxiliary with accommodations for four to six people.
Construction: Carvel planked over sawn frames.
Alternative construction: Plywood (plans included).
Lofting is required.
Plans include 15 sheets.
Tom Cat is a shoal draft catboat of plank-on-frame construction, but strip construction would do as well.
Lofting is required.
Sail area is 120 sq. ft.
Plan includes 9 sheets.
This is a simple 8ft stitch and glue sail/row pram. It requires only 3 sheets of marine plywood and should be very fast, easy, and inexpensive to build. It should end up just over 80lb so easy to transport as well.
Jolly Boat is a rocking toy boat designed to provide years of make-believe nautical adventure for the young sailor, It is an adaptation of the classic flatiron skiff, a type that generations of “old salts” remember fondly as their first “real” boat.Jolly Boat has a length of 48″ and a beam of 23″
The Champlain is a good traditional style general purpose recreational canoe.
Fantastic, well cared-for boat built by Lowell’s Boat Shop in 2020—perfect for coastal adventures
Wood hull built with meticulous and painstaking detail from a kit using a "stich-and-glue" method
12' wooden sailing/rowing skiff. Owner built in 1985 from King and Davis design.