Oar / Paddle
17' 0" Endeavour
The sharply raked stem and well shaped forward sections will provide increasing buoyancy as the Endeavour punches into large waves.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The sharply raked stem and well shaped forward sections will provide increasing buoyancy as the Endeavour punches into large waves.
Construction - Glued lapstrake clinker plywood.No Lofting required.Plans include 8 sheets with photocopies of Classic Boat building series.Sail Area - 53 sq. ft.
Commuter style launch with diesel inboard and a small cabin.
A simple, spacious, singlehanded cruiser designed for carvel construction. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 7 sheets
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
An oceangoing V-bottomed auxiliary with accommodations for four to six people.
Construction: Carvel planked over sawn frames.
Alternative construction: Plywood (plans included).
Lofting is required.
Plans include 15 sheets.
The Eureka is a pretty, simple to build plywood canoe built in stitch and glue, (44lbs down to 34) and paddles nicely. Very comprehensive plans - a boatbuilding course in a book.
Flat-bottomed sailing skiff. Plans options include cross-planked or plywood bottom.
Construction: Cross-planked bottom, lapstrake sides
Alternative constuction: Plywood, glued lapstrake plywood
Lofting is required
Plans include 4 sheets.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
British plank-on-edge cutter designed by George L.
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.