Oar / Paddle
13' 9" Rice Lake Skiff
The Rice Lake Skiff is sure to be a very useful boat at the cottage for fishing, rowing or just knocking about.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Rice Lake Skiff is sure to be a very useful boat at the cottage for fishing, rowing or just knocking about.
Small blue water cruiser with Junk rig, inside steering station, and accommodation for up to four persons.
Suitable for home boatbuilders, all wood construction, lead ballast cast in small pigs.
The lines for this canoe were taken from an original ‘Huron’ built in cedar/canvas by the Peterborough Canoe Company. It was a second grade model in a series of Cruiser canoes that measured from 16′ x 33″ to 18′ x 37″.
An ultralight solo pack canoe weighing in at 26 lbs. Carry the boat in one hand, your paddle in the other.
Good performance with modest horsepower, a soft and predictable ride. I/O or outboard, 80-200hp.
The Mark V 39 is an outboard powered Sharpie houseboat.
Wide, shallow racing sloop designed by Cornelius Gorman in 1878.
A trim, rugged, carvel-planked cruiser with simple accommodations for two and a choice of gaff or marconi rig.Construction: Carvel planked over steamed framesAlternative construction: Cold-molded or strip Lofting is requiredPlans include 7 sheets
This design has a built-down keel to provide a deeper bilge, a centerboard housed entirely within the ballast keel, and a straight sheer.
Construction: Strip-planked over bulkhead / frames
Lofting is required.
Plans include 8 sheets.
PALOMA is a simple, traditional and versatile boat which has been designed in three versions, as a small cruiser, as an open daysailer and as a motorboat.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).