Oar / Paddle
Yankee Tender
Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.
Round-bottomed, carvel-planked powerboat with two berths and a single 300-hp engine.
Construction: Carvel planked over steamed frames.
Alternative construction: Strip or cold-molded
Lofting is required.
Plans include 5 sheets.
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.
A handsome daysailer based on the Herreshoff Fish Class, but with a centerboard conversion similar to that of the Haven 12 1/2.
Construction: Carvel planked over steam-bent frames.
Lofting is required.
Plans include 6 sheets.
The Mill Creek 16.5™ is enormously popular because it can be used in so many ways. Not only can you paddle it as a single or a double, but you can sail it, or add a sliding-seat rowing unit.
Our Deben Class designs are inspired by the original Deben 4-tonner, which my father commissioned from W. M. Blake in 1936 and the Deben 6-tonner, designed by my father in 1950. At least 35 of the 4-tonners and 3 of the 6-tonners were built between 1937 and 1960.
Based on traditional crabbing skiff documentation by Howard Chapelle, this has proven to be a fast and stable boat that can carry a real load.
The Lorna has a slim sweet hull for experienced paddlers.
Nautilus is one of the best surviving examples of Ben Seaborn's design and the Blanchard Yard's c
Custom built Bar Tender with barrel back, carbon fibre bottom, mahogany through out, custom inter