Oar / Paddle
Sasquatch 14-30
A stitch and glue touring canoe design 14' x 30" [4.3 m x .76 m]
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A stitch and glue touring canoe design 14' x 30" [4.3 m x .76 m]
Construction — Glued lapstrake clinker plywood. Alternative construction —Traditional plank, cold molded and strip plank. No Lofting required. Plans include 7 sheets with instructions. Sail Area — Lug 65 sq. ft. Sloop 84 sq. ft. Yawl 81 sq. ft.
LITTLE CRAB is a smaller version of the Chesapeake Crab Skiff I drew several years ago.
A development from our very successful and popular Design No.
Austral’s design is an outgrowth of my 26' Wynfall design, intended to provide additional space below decks, including standing headroom. She is slightly heavier, longer and wider, and has more freeboard than her smaller sister.
Very simple workboat for outboard motor power. Suits 8 to 30 hp motors,carry up to six persons, can be built longer or shorter as required.
The Blitz420 sportive dinghy. The sleek lines and narrow hull makes it fast and fun, especially with weak and medium winds.
If we have to base ourselves on market demand before 2008, the two daysailers that we propose are very small. At that time, generally characterized by a continuous increase in boat size, it seemed as though a daysailer could not be less than 12 m, (even better if it exceeded 15 m).
A narrow beam and shallow arch hull make the Canadien ideal for general-purpose paddling and light tripping.
The Noank Pulling Boat is an 18′ x 36″ [5.5m x 91cm] sliding seat rowing boat suitable for open water travel.
Built in Denmark (1930s-40s ?) Eric Salander design. Restoration Project.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.