Sailboats - Cruising
Didi Cruise-Mini
Didi Cruise-Mini radius chine plywood cruising sailboat
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Didi Cruise-Mini radius chine plywood cruising sailboat
These completely new designs were developed at CLC in response to a growing constituency of skilled paddlers seeking waterborne sports cars for racing, exercise, or just plain fun.
A stitch & glue tender that can be rowed, motored and that sails like a charm.
Please note: this design was formerly known as Pike.
Construction - Glue-lap-plywood flat bottom.
Alternative construction - Traditional plank.
No Lofting required.
Plans include 3 sheets with instructions.
Sail Area - Sprit 60 sq. ft.
The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
LYS stands for Lumber Yard Skiff. These rugged flat bottom work skiffs were originally designed to be built using materials readily found in most lumber yards- underlayment plywood and spruce framing.
This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
Design Specs:
Flat Bottom
Open Boat
LOA. 17′-3″ (5.2m)
Beam 6′ (1.8m)
Weight 450 lbs (204 kg)
Material Plywood, Hard Wood
Fiberglass, Other.
Recommended hp. 25
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.