Oar / Paddle
7' 7" Nutshell Pram
Glued-lap plywood rowing or sailing tender with plenty of capacity.
Construction: Glued lapstrake plywood.
No lofting required.
Plans include 8 sheets.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Glued-lap plywood rowing or sailing tender with plenty of capacity.
Construction: Glued lapstrake plywood.
No lofting required.
Plans include 8 sheets.
Safe, seaworthy, shoal-draft double-ender, with a flat bottom and centerboard. Lofting is required. Plans include 4 sheets.
Good performance with modest horsepower, a soft and predictable ride. I/O or outboard, 80-200hp.
The boat is nice to row - a good combination of tippy enough for an intermediate, yet after a few days a novice will get the hang of it.
SPHERA is a simple cruising boat, studied for the maximum ease of construction in relation to its size.
The Unicat 2.4 is all about practicality and safety. Packing a 230kg load capacity, the Unicat is suitable for 3 adults, and the inverted vee hull is much more stable than conventional dinghies. The high freeboard also ensures a dry ride in most conditions.
SCHEGGIA (designed to compete in 10 Foot Class – www.diecipiedi.it) is narrow at waterline which makes it fast. Thanks to its flare sides stability increases considerably when the boat starts to hee
Built by eye in the Bahamas for the last 40 years, Doug Hylan’s drawings allow for strip-planking or cold-molding.Construction: Strip-planked over laminated frames.Alternative construction: Cold-molded, plans included.Lofting is required.Plans include 6 sheets.
This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.