Sailboats - Cruising
BRIO 555
The BRIO 555 is a fast and easy to handle boat, suitable to be sailed sportively by a crew of two or quietly and safely by a larger crew.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The BRIO 555 is a fast and easy to handle boat, suitable to be sailed sportively by a crew of two or quietly and safely by a larger crew.
A versatile 4-metre open utility / runabout for river and inland lake use, built in taped-seam plywood.
Before the advent of the outboard motor, rowing/sailing skiffs were common on Chesapeake Bay. They were used for crabbing, fishing, transporting goods, and enjoying summer evenings with a friend.
Accomodates 2-4 for daysailing, and has a small cuddy cabin. Construction: Carvel Planked over sawn frames. Alternative construction: Strip, or strip bottom with plywood sides. Lofting is required. Plans include 7 sheets.
Kingfisher’ II is was developed directly from Kingfisher. Hull shape was modified with with flatten side line and reduced height. Other hull dimensions remain the same, width of 93 cm, flat bottom and slim shape gives good stability and maneuverability.
The Great Alaskan is a very versatile inshore/offshore powerboat with a seaworthy semi-dory style hull. These fiberglass/wood stitch-n-tape boat plans give the builder the freedom to adapt the cuddy, pilothouse, and cockpit layout to his preference.
With her 28″ beam, substantial flare, and sweetly shaped ends, she loves rough water. Her plywood hull is one of the prettiest we’ve seen.Construction: Plywood over web frames. Lofting is required.Plans include 4 sheets.
A boat to take you to all the shallow water places that most sailors never see up close (deep water places too). At only 95 lbs it is easily car topped or trailered and can even be launched from many places without a ramp.
Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of Hal Kelly.Mia
The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it would be the fastest possible.
“CHARM” is an 85′ LOA schooner originally designed to be a personal yacht that was built and fini
Built in 1933 as a commercial NC “sink netter”, “Sylvia II” has been totally restored and rebuilt
William Shaw design, 24' Yawl with shoal keel and centerboard, built 1958 in Denmark.