Sailboats - Daysailers
Skerrieskiff 15'
Construction - Glued lapstrake clinker plywood.
No Lofting required.
Plans include 5 sheets with instructions.
Sail Area - 60 sq. ft.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Construction - Glued lapstrake clinker plywood.
No Lofting required.
Plans include 5 sheets with instructions.
Sail Area - 60 sq. ft.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
24′ Chesapeake Bay Hampton FlattieL.O.A.: 24′ 2″L.W.L.: 22′ 8″Beam: 7′ 9″ Draft: 2′ ½″/3′ 9″Sail Area: 263 sq ftWeight: 2,500# (approx)Proportionately, this is the largest sharpie type known, and shows the maximum beam ratio successfully used in the sharpie type.
This boat is happy playing near the beach, on portages or off on a two week canoe trip.
The boat is nice to row - a good combination of tippy enough for an intermediate, yet after a few days a novice will get the hang of it.
The T*Boat is a Wood / Plywood / Resin structure. The T* comes in 2 Versions. The T*5 is a one person version and the “Coming Soon” T*Six is a 2 person version. The T*5 can be built from scratch using our Drawing and Instruction Package. Or it can be built using the T*5 Kit.
MIA is a 12 foot runabout, Her design is inspired by William Jackson's 1955 design for the 'Ace' which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com).This design differs from those of the period in that it is to be constructed i
A low-power, moderate-speed inboard runabout for protected waters. Designed for sawn frames and batten-seam planking.Construction: Battened-seam planking over sawn frames. Lofting required. Plans include 5 sheets.Please note: the Westerbeke 26G engine spec’d in the plans is no longer manufactured
Here is another little skiff inspired by a Chesapeake Bay working craft.
Built 2019-2021, 1,300 hours. Sailed just seven times.
An International 14 sold at the 1938 New York Boat Show is berthed at Wanaksink Lake, NY and has
"MYRTEA" is looking for a new caretaker having not missed a sailing season over the 37 wonderful
For Sale 1959 Chris Craft Sportsman. Chris craft 283 V-8. 5200 no soak bottom.