Sailboats - Daysailers
KIS 4.7
We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders.
The Unicat 2.4 is all about practicality and safety. Packing a 230kg load capacity, the Unicat is suitable for 3 adults, and the inverted vee hull is much more stable than conventional dinghies. The high freeboard also ensures a dry ride in most conditions.
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
Pathfinder is a big, classic, stable daysailer with space on board to set out two airbeds and sleeping bags on a flat floor, designed for home boatbuilders she is an exceptional performer under sail.
The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.
Construction: Cross-planked bottom, lapstrake sides
Alternative construction: Plywood or glued-lapstrake plywood
Lofting is required
The North Sea 29 is a centerboard boat designed for sailing in the rough North Sea. She’s a fairly heavy displacement boat that will prove a very capable ocean cruiser.
the Mark V 20 is a trailereble outboard powered cruiser.
You can enjoy paddling easier and funnier with less budget because it’s made of plywood, sectional and you can build one in a week.
Offered here is a beautiful 1958 Ohlson 35' sailboat that's ready for a new home.
All hardware original, complete set Harken blocks. Mast, boom cuddy bars and tent.
$11,900 - Beautiful, reliable boat Complete restoration.