Sailboats - Cruising
Cape Henry 21
Cape Henry 21 lapstrake plywood trailer sailer
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Cape Henry 21 lapstrake plywood trailer sailer
ALBATROS 26’ is the smallest sister of the ALBATROS family, our modern classic yachts. Far its size it cannot be defined a “blue water yacht” but it is a seaworthy boat.
Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker.
The CS23 is an offshore boat based on the Carolina Sport Fishing boats lines.
This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length.
The Mini Vee is a simple-to-build v-bottom racing boat designed for APBA Mini GT and GT Pro racing. Also an excellent high-performance boat for the non-racer and a great boat building project for an individual or the whole family.
This runabout reveals the influence of Zimmer’s association with John Hacker, and will require expert boatbuilders.Construction: Batten-seam planking over sawn frames.Lofting is required.Plans include 4 sheets.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
Lightweight, reasonably seaworthy recreational single with a sliding seat and outriggers.
Construction: Cold molded
Lofting is required
Plans include 5 sheets.
Construction - Glued lapstrake clinker plywood.No Lofting required.Plans include 8 sheets with photocopies of Classic Boat building series.Sail Area - 53 sq. ft.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).