Launchings

Wolfgang Müller of Beckdorf, Germany, recently launched this Gloucester Rocker that he built for his nephew Jannis. Though only a year old, Jannis took command of his first ship with pleasure.

This canoe is based on the Laughing Loon Wee Vera plans for a 10ft canoe. I stretched the plans out to 12ft. It is a cedar strip design.

Philip Bolduc spent less than $1000 in the construciton of this Sailfish look-alike. Chosen for its simplicity, he used stitch-and-glue construction with pieces of 1/4" plywood.

Bruce Lemon designed this 17' Aleutian Baidarka skin-on-frame kayak, built by Charles Hall of Salt Lake City, UT. He made the frames from bent oak lashed to Douglas fir stringers. The skin is a synthetic canvas sewn together on top and around the canvas coaming. He used no glue or screws.

Jessie and Giles Kopfelt get plenty of seatime aboard their Gloucester Rocker built by their grandfather Svein Kopfelt. The rodker gots tons of sea miles under it already.

Annapolis Wherry

Joe Walsh of RI has been working on a writen history of a passing tridition. The Quahog skiff was a staple of the waterfront in Rhode Island for many years. Of late they are hard to find.

Cristobal Verde, a shipwright from Sarteneja, Belize, started building this 16′ sailboat for an American living in New York City. Midway through the job, the boat was abandoned and left unfinished for three years.

Paul Bennett of Shoestring Shipyard designed this Pilgrim's Pride 16 built by Jimmy Helms of Charlotte, NC. Jimmy writes that it was his first big project and a pleasure to build, going together just as the designer said it would.

Russell, Jamie, Tyler, and Justin Wilson are seen here standing beside their family's canoe, CANADIAN PRIDE, at its launching in October 2003.