RV PAX
Jay Harman rescued and spent years painstakingly restoring this historic minesweeper, turning her into expedition yacht and marine research platform.
This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers. If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here. (All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
Jay Harman rescued and spent years painstakingly restoring this historic minesweeper, turning her into expedition yacht and marine research platform.
Richard Hudak, of Hilo, Hawaii, built this gleaming 16′ canoe from sugi cedar. He cut the tree down and milled the wood himself. He made the gunwale and seats from sprice, and the rails, stems, and breasthooks from koa. He made the paddle from Portuguese cypress, spruce, and sugi cedar.
Jim McQuaide and Eric Schade spent August of 2008 building canoes at the Maine Maritime Museum in Bath, Maine. Eric built the Schoodic 14 design, while Jim built a Schoodic 17.
Jim Maas can fit his Sabotina dinghy into his minivan. Jim launched the 7′10″ Ken Hankinson design last July. He rows it on the lakes of eastern Pennsylvania. The hull is stitch-and-glue, built from okoume plywood. Jim took these pictures at Beltzville Dam.
On June 17, 2015, Mark and Suzanne Nye launched their Shearwater Double at Silver Springs Florida. The kayak, built from kit by Chesapeake Light Craft, took approximately 135 hours over a six month period. Construction is stitch and glue with sapele deck and okume hull.
Originally launched June 25, 2005, this Cosine Wherry needed a refresh. The sliding seat was removed and a more traditional interior was installed this summer. Two cedar strip buoyancy tanks were added, along with many coats of varnish and new oars from Barkley Sound Oar & Paddle.
Steve Miller launched this Swifty 12 designed by Fred Shell (www.shellboats.com) on May 27, 2001. She is 12' long with 5'3" beam. Steve named her SURPRISE and provided her with a sprit rig. He sails her on the lakes around Portland, OR.
After a period of almost 13 years I finished my wooden schooner and launched it in a canal near my home in the eastern part of Holland. First I had to pass a lot of bridges before I could finish it all with stepping the masts.
Andy Rockwood launched this John Gardner Surf Dory on June 24, 2001. He built the boat for Stuart Walker of North Muskegon, MI, who plans to use the boat on the Great Lakes. Andy built the boat using traditional methods with white pine planking on white oak frames.
Rick Miller of Miller Marine Systems completed this Penobscot 14 in 2003. She is a pulling version of the Arch Davis 14' x 4'6" design, using a daggerboard. LOLLYPOP was delivered to her owner, Charles Ward of Barbados, West Indies and launched on December 25, 2003.
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.