Launchings

Displacement hull launch with 4 HP outboard. Build as batten-seam construction from Alaska Yellow Cedar and Port Orford Cedar lumber (full length 1x6 stock). Bottom is 2 layers 1/2″ marine plywood with epoxy fiberglass to the waterline.

SHADOW of Gig Harbor, Wa USA. Maiden voyage April 14th, 2024. For his 3rd wooden boat build Stewart Nelson chose the SQUIRT, a Glen L. Design. The 10′ craft is outfitted with a 15hp outboard motor.

Rene Burdahl of Innvik, Norway has been busy building boats. Among his recent boats are a 16' canoe. The plans called for cedar strip planking, but Rene used spruce and then glassed the hull inside and out. The seats are oak and gunwales are elm. The yoke and breasthook is cherry.

Jessica Glazer took these pictures of her father, Russ, sailing WILLIWAW.  Arch Davis designed the gunter-rigged Penobscot 14 , that Russ built with 1/4″ mahogany plywood, pine stringers and seats, and fir knees and spars. Russ sails his boat in Western Massachusetts. 

I built this little Beach Pea so my granddaughters and I can learn to sail, it also rows very nicely. It is constructed of doug fir marine ply for the planks and almost everything else is ash. The name and paint job were inspired by traditional Jamaican fishing boats.

The B&B Yacht Designs Two-Paw 8. The Two-Paw is a nesting pram, stitched-and-glued using Okoume, Sitka Spruce, Mahogany and Ash.

Art Ross writes "Thompson Bros. of Peshtigo, WI, built this TVT Hi-Speed Fish Boat in 1954. She spent the last 30 years residing in an Amish barn. She is 14' LOD, has a 55" beam, and goes real fast with a 1967 Mercury 350.

The owner of this classic 30-ft Grandy, Jon Kjaerulff of Gig Harbor, Wash., took his Express Cruiser to Gig Harbor Marina & Boatyard for a much-needed transom repair.

GNALGAN has been my project over the winter months in Victoria, Australia. The name is an Australian Aboriginal word for the “Nankeen Night Heron.”She is made of 4mm marine ply which has been coated inside and out with fibreglass.