Launchings

She needed to be nesting to be taken out of the basement where she was built.

A modified Chesapeake Light Craft Guider. I built this boat over the 2021-2022 winter in my garage/shop in Connecticut. I am sailing her out of Pulpit Harbor in Penobscott Bay, Maine.

Martin Herbert built ZOCCOLO, an International One-Metre design, to race in regattas up and down Canada’s west coast. He launched her on January 20, 2017. She is one metre (39″) long, 16cm (6″) wide, and draws 42cm (17″).

A stripper that goes by the name BONNIE. Built from recycled pine, oak and black walnut. She’s a cross between a kayak and and a canoe… a kayoe if you will.

After forty years of building skiffs and dories, first, under the tutelage of the old timer, Fred Tarbox, at Lowell’s Boat Shop and later as Parker River Boat Works, this will be my first published launching.

Frank Fletcher spent two winters taking apart and rebuilding this boat he rescued from a neighbor's shed. He was able to reuse 80% of the original parts. He 'glassed the bottom up to the first strake to help protect it from its future use on his beach.

LI’L BOAT was launched September 3, 2013 in Egg Harbor, WI. Hull was stripped planked using Atlantic White Cedar and sheathed in fiberglass cloth and epoxy. Transom, seats, and trim are Mahogany. Flooring is Cumaru and spars are Douglas Fir.

Doug Puckering launched two boats in May of 2004: a Steve Killing-designed 17' canoe and a Joe Greeley-designed 16'10' kayak. The canoe has a beam of 33-1/3" and weighs 50 pounds. Doug plans to use it in canoe segment of the Ski-to-Sea race on the Nooksack River.

1971, 60′ FDMY by Pacemaker. 2 1/2 years rebuilding her bottom. Short shake down cruise last season and looking forward to launching and a long boating season this year.

The Welsford Navigator, Puffin, was launched on June 5, 2016. This is my first scratch built boat. Okume plywood was used throughout with white oak and Brazilian cherry for the various and sundry bits.