Launchings

Over the 2017-18 winter wooden boat enthusiast and craftsman Fred Kircheis worked with his niece, Tyler Kidder, to build her a Shellback dinghy with sailing rig in his home woodworking shop in central Maine.

I helped my friend Glenn Strombo build this Adirondack Guide Boat to the plans found in “Building an Adirondack Guide Boat” by Michael J. Olivette and John D Michne.We shortened the length by 16 inches to utilize more readily available 16 foot cedar planking stock.

My Doug Hylan designed 13′ Beach Pea is the first wooden boat I have built from scratch. She is made from okoume ply, Douglas Fir, with utile mahogany thwarts and knees and Sitka spruce spars.

As a student of Ted Moores' WoodenBoat School class, David Racicot worked on this strip-built Freedom 17 canoe, designed by Steve Killing. David took it home and launched it in September 2002 at Suffolk, VA.

Seggerling racing dinghy — mahagony-okume combi marine plywood.

Dave Thompson built this boat using Dynamite Payson's Book, Build the New Instant Boats. He used 1/4" luan plywood, hemlock fir 2x4s, porch floor pain, and spar varnish to build her.

Red Davis, of King & Davis, Port Townsend, Washington designed this Norwegian pram for the Gougeon Brothers as a boat intended for plywood-epoxy construction. Gougeon still carries the plans. Jim Van Horn started this hull in 1986, and then stored the boat for 20 years.

Tim Allen built this 7' pram from a design by Glen-L Boats of Bellflower, CA. Named CROW'S NEST, he intended her as a sailing pram using leeboards. He found that it only sails downwind and capsizes easily, so Tim bought a 2hp Honda motor to replace the sailing rig.

This is Chesapeake Light Craft’s tandem wherry rigged as a single. I started working on it the spring of 2015, continued through that summer and then hit the pause button when work was interrupted by life (hernia surgery) and cold temperatures. I finished up the wherry this summer.