Launchings

David Eikamp writes that he has enjoyed every minute of the two years he spent building SOUND, and Iain Oughtred Spike sailing skiff. He bought the plans from The WoodenBoat Store, then got started on the construction.

Rowland Hill completed this 15' x 4' York Delaware Ducker in November 2000. He got the plans from Mystic Seaport Museum. Planking is epoxied Sapeli marine plywood. Rowland used oak for the stem, rudder, dagger board, and cowling. He and his son sail the boat in Pleasant Bay, Cape Cod.

This is a relaunching of my rowing skiff. Brass plate on transom states:John D. LittleBuilderOld Lyme, Ct.After researching, I believe him to be the same John D Little who moved from Connecticut to Maine and became somewhat famous for building catboats.

MARILYN D has a 26' hull of intact cold-molded spruce. She was originally called IMPULSE and owned by Cabot Lyman, who used it as a commuter boat for 10 years, and was the original 'Jet' boat out of Lyman Morse. Mike Perlis and Lyman Morse restored her over the winter of 2001-2002.

Stretched version of Harry Bryan’s Rambler design, 26′ cedar on oak diesel inboard launch, powered by a 20 hp Universal diesel.

Doug Clough launched his Platt Monfort designed Nimrod 12 solocanoe in his hometown of Mystic, Connecticut. It is 11′6″ long and 34″ wide.

Jericho Bay Lobster Skiff, launched in August, 2020. My first boat build, built part time in my garage.Rigged with a 2021 Yamaha 25 HP. A light engine, only 126 lbs, reaches 25 mph. Nav lights, GPS-enabled VHF, Garmin 1400 GPS/Chartplotter, digital engine gauge.

Ken Spring writes "Keith Matlack uses his 15'7" x 41" sharpie skiff, SQUALICORAX (Latin name of an extinct shark) for fossil hunting along the shores of the Chesapeake Bay.

Richard Albert built this 14' pulling boat SECOND SNAKE designed by Henry Rushton (Model 109 Pulling Boat of 1884), launch ing it on August 9, 2004. He uses it on the Delaware and Raritan Canal in New Jersey, and the Delaware River.

San Francisco Pelican [12 foot] #2925 was launched Dec 12, 2022 at Austin Yacht Club after 1000 hours / 18 months of building. Plans and builders guide were purchased from Duckworks boat building supplies. Built in a traditional manner, Capt.