This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers.
If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here.
(All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
Built Six years ago in Perth Western Australia. Relaunched after health issues prevented sailing for a while.
Higher Freeboard, Self Draining Cockpit Deck and Sail furling added to Gary Deirkings design.
Chris Bullen started building SAM'S SMILE in February 2000. Rascal is 14'8 x 5'6" Ken Bassett Rascal design. Launched in May 2001, he named it SAM'S SMILE as he could not "keep the grin off his face whenever he went into the garage to work on it.
Tom Wignall of Lakeville, MN is seen here sailing his new Arch Davis Sand Dollar design BAY DAWG on Pelican Lake in Breezy Point, MN. BAY DAWG, launched in June 2002, is 11'6" with a 42" beam. He constructed her with mahogany planking on oak and cedar frames, covered with System 3 epoxy.
Bill Bornemann writes that he "built this 9' long, 4' beam, plywood skiff inspired by Howard Chapelle's description of the flat iron skiffs in his book, Small American Sailing Craft. She was assembled and painted in one day as part of his 50th birthday celebration.
When Mike Morris and Matt FitzGibbon discovered they both had a desire to build a boat, they decided to build one together. Using Canoe Craft by Ted Moores and The Stripper's Guide to Canoe Building by David Hazen, they constructed a 16' strip-built Abenaki model covered in Hazen's book.
Herb Friese built this 16' x 35" cedar strip canoe, Abenaki model, from plans and materials supplied by Newfound Woodworks, Bristol, NH. Herb said it took about eight months of part-time work in his garage. The canoe will be used in the waters around Catskill, NY, by owner Kathleen Farrell.
Raymond Wright used stitch-and-glue construction with African mahogany plywood in building this CLC 17 kayak. He also included a retractable skeg, and designed the spruce paddle. He launched the kayak on Schroon Lake on Aug 30, 2002. Write Ray at P.O. Box 62, Adirondack, NY 12808.
15′6″ Cottage cruiser. Local red cedar, cherry and white oak. Hand woven cane seats.
John and Barbara Strattan built these kayaks in 2003. They are Mill Creek 13 kayaks, designed by Chris Kulczyki of CLC. They use the pair on the streams and rivers of north central Kentucky.
Built at The Nautical Arts Workshop. Quarter inch Okoume plywood was used for the lapstrake planking. The transom, gunwale and seats are made of cherry. The paint is from George Kirby.
Built by professional Vermont furniture maker. In exceptional condition.
This Venetian Gondola (K208) by Wooden Boat USA (2025) captures the elegance of traditional Venet
This is the launch of my cutter based a design by C P Kunhardt from 1885.
