Launchings

In 2002, Sal Balsamo built this Ninigret V-bottomed bassboat designed by Atkin Boats of Noroton, CT. Sal used 3/8" okoume plywood planking over white oak frames fastened with bronze screws.

Rebekah Rogers built her first boat, this Salt Bay Skiff, with her Dad, Dave Racicot.

I started building my Melonseed Skiff in 2017 and finished it in 2021. Because I do not have a garage or large shed, I did work outdoors from May to November (living in Sherbrooke, Québec).

Jeff Ennis and his four sons built this birchbark canoe (16' x 36") in the summer of 2004 in Lac St. Marie, Canada. They used birch bark, green cedar, and spruce root in the construction. The green wood can be easily split into almost paper-thin sheets for making the floorboards.

Modified Doug Hylan Beach Pea, built from Meranti plywood as a tender for our Gartside/Jespersen yawl, “La Vie en Rose”. Storage/flotation compartments have been installed under the stern sheets using the water-tight hatch kits from Port Townsend Watercraft.

When his grandchild Eden was born, Stan Swan started building her an Original Gloucester Rocker. After several more months than he anticipated, he finally finished it and presented it to one-year-old Eden on July 10th this year.

Brothers George and Jim Brown, built this 16' Weekender Miniature Friendship Sloop, the DOTTIE B., from plans by Stevenson Projects of Carmel, CA. George writes that the boat handles well, and they plan to use it on the numerous lakes of southern Maine.

Lucas Pharmer, son of Andrew Pharmer, is seen here standing beside LOUIE DA' BOY, a 15'8" x 33" Iain Oughtred McGregor Canoe. Andrew and Lucas built the boat according to the methods described in Ultralight Boatbuilding by Thomas J.

Built as a tender for our Daysailer. The Pram will help us get out to the mooring and back. This is not my first build, but is a great first boat for anyone who wants to give building a try.