Oar / Paddle
Skana
Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.
The GYPSY 28 was the Woods Designs’ own cruising boat for five very successful years. It was designed as an easy-to-build budget ocean cruiser and many are now sailing in all corners of the world.
4.80 m Plywood stitch & glue touring canoe. Only two plywood sheets are needed!
Small blue water cruiser with Junk rig, inside steering station, and accommodation for up to four persons.
Suitable for home boatbuilders, all wood construction, lead ballast cast in small pigs.
A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.
Construction Method: Carvel planked over steamed frames
Alternative construction: Cold-molded or strip
Lofting is required
Plans include 4 sheets.
Feel the difference a proportionally correct sized kayak can make in your paddling enjoyment.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.
Good performance with modest horsepower, a soft and predictable ride. I/O or outboard, 80-200hp.
Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.You’ll notice the different stem patterns on plans page 5...
“CHARM” is an 85′ LOA schooner originally designed to be a personal yacht that was built and fini
Built in 1933 as a commercial NC “sink netter”, “Sylvia II” has been totally restored and rebuilt
William Shaw design, 24' Yawl with shoal keel and centerboard, built 1958 in Denmark.