Oar / Paddle
Sea Island Sport
The Sea Island Sport is CLC’s response to hundreds of requests for an attractive stitch-and-glue sit-on-top kayak. Credit for the design goes to Nick Schade.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Sea Island Sport is CLC’s response to hundreds of requests for an attractive stitch-and-glue sit-on-top kayak. Credit for the design goes to Nick Schade.
Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two
Rugged carvel construction, round bottomed. Driven by a small inboard. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded, Strip. Lofting is required. Plans include 3 sheets.
Lightweight, reasonably seaworthy recreational single with a sliding seat and outriggers.
Construction: Cold molded
Lofting is required
Plans include 5 sheets.
Flat-bottomed sailing skiff. Plans options include cross-planked or plywood bottom.
Construction: Cross-planked bottom, lapstrake sides
Alternative constuction: Plywood, glued lapstrake plywood
Lofting is required
Plans include 4 sheets.
Lively, fast, planing racer/daysailer. Construction: Double-diagonal planking over steamed frames. Alternative construction: Cold-molded. Lofting is required. Plans include 4 sheets.
The Hawk SS takes you far into the world of high performance.
Good dories have a reputation for being difficult to design but easy to build. Iain Oughtred has taken care of the hard work here-you can’t go wrong with his detailed plans for this lapstrake (plywood) Swampscott derivative.Construction: Glued lapstrake plywood over sawn frames.Alternative constr
Kingfisher’s shape was inspired by famous Chestnut Prospector. Hull width of 93cm, flat bottom and slim shape gives good stability and maneuverability. It is designed for crew of 2 with additional equipment (tents, fishing rods…).
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
“CHARM” is an 85′ LOA schooner originally designed to be a personal yacht that was built and fini
Built in 1933 as a commercial NC “sink netter”, “Sylvia II” has been totally restored and rebuilt
William Shaw design, 24' Yawl with shoal keel and centerboard, built 1958 in Denmark.