Plans & Kits

4.80 m Plywood stitch & glue solo canoe.

Construction: Carvel planked over sawn & steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 11 sheets.

A classic double paddle solo canoe. This hull design has been built in many versions, from a simple light weight fast cruising canoe, to a full decked version of bookmatched walnut veneer.

Our Trawler 28 is a sturdy offshore trawler with a straight shaft inboard diesel. This makes the TW28 an ideal boat for a couple to live aboard or for a crew of 4 on vacation.

EURO 2150  MOTOR YACHT ... There are several accommodation arrangements possible for this design.

A handsome daysailer based on the Herreshoff Fish Class, but with a centerboard conversion similar to that of the Haven 12 1/2.

Construction: Carvel planked over steam-bent frames.

Lofting is required.

Plans include 6 sheets.

Fast / Lightweight / Easy-to-BuildSpecifications:

• LOA 15′ 6″
• LWL 14′ 9″
• Beam 5′
• Draft (board up/down) 4″/36″
• Depth amidships 20″
• Sail Area 105 (lug) 14 sf (sprit)

Round-bottomed, carvel-planked powerboat with two berths and a single 300-hp engine.

Construction: Carvel planked over steamed frames.

Alternative construction: Strip or cold-molded

Lofting is required.

Plans include 5 sheets.

If we have to base ourselves on market demand before 2008, the two daysailers that we propose are very small. At that time, generally characterized by a continuous increase in boat size, it seemed as though a daysailer could not be less than 12 m, (even better if it exceeded 15 m).

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise.