Plans & Kits

Didi Mini radius chine plywood Mini 650 racer

Austral’s design is an outgrowth of my 26' Wynfall design, intended to provide additional space below decks, including standing headroom. She is slightly heavier, longer and wider, and has more freeboard than her smaller sister.

high performance sea kayak

The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a car.

This dinghy could be considered a big little boat.

She has a lot of excellent qualities: excellent rowing and sailing ability, easy construction, and mannerly towing habits.

Construction: Glued-lapstrake plywood.

Alternative Construction: Traditional lapstrake.

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage is available up forward below the casting deck.

Wide, shallow racing sloop designed by Cornelius Gorman in 1878.

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.

A stable (28 1/2″ beam) strip-built touring kayak.

Planked up with 1/4″ cedar strips.

Construction: Strip planked.

Lofting is required.

Plans include 4 sheets.

The Shearwater double design abounds in interesting and innovative features.