Plans & Kits

Didi 40cr radius chine plywood cruiser/racer

This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been some adjustments to take care of this.

A stitch & glue tender that can be rowed, motored and that sails like a charm.

Kiska is a wood strip/epoxy single kayak. Based on Greenland kayak lines, this low volume kayak is playful but tracks well

Attention Amateur and Professional Boat Builders!Bayside Marine Design has stock electrical plans for your boat project. All of the information and schematics you need to wire a new boat or re-wire an existing boat are in the package.

The Start 42 is designed to sail very very fast as a 14 ft international.

Virginia Park is an elegant lapstrake launch. Featured in WoodenBoat #234, Sept. – Oct. 2013, Virginia Park is built in the glued lapstrake method with steam bent frames.

The success of the proven Chesapeake™ hull shape led quickly to demands for similar three-person designs. With a 700lbs payload and surprising speed.

Lively, fast, planing racer/daysailer. Construction: Double-diagonal planking over steamed frames. Alternative construction: Cold-molded. Lofting is required. Plans include 4 sheets.

A versatile 4-metre open utility / runabout for river and inland lake use, built in taped-seam plywood.