Plans & Kits

An easily built ,attractive, plywood pirogue/canoe.

Please note: this design was formerly known as Pike.

Construction - Glue-lap-plywood flat bottom.

Alternative construction - Traditional plank.

No Lofting required.

Plans include 3 sheets with instructions.

Sail Area - Sprit 60 sq. ft.

The North Sea 29 is a centerboard boat designed for sailing in the rough North Sea. She’s a fairly heavy displacement boat that will prove a very capable ocean cruiser.

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two

BEN GARVEYS - Ben 15' 9", Big Ben 19'
Fine boatyard skiffs or small harbor ferries.
A pair of boats that will feel right at home on the working waterfront.

This schooner is designed to be able to cruise offshore with a crew of four people.
Here heavy displacement and built down hull will make for a comfortable motion

M80, is a simple to build plywood trailable trimaran, plans are very complete and include DXF files for CNC cutting.A standard folding system is used to faciltate trailing by road at a folded width of 2450mm.The interior consists of two wing berths 2000 x 600 a single up forward 1900 x 700 with r

The 16' Prospector features a flattened, shallow arch hull with its fullness carried into the bow and stern, good depth amidships to maintain freeboard and deepened ends to keep paddlers and gear dry.

Construction: Carvel planked over sawn & steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 11 sheets.

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.