If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Mark V 28 is a trailerable 28 foot outboard powered houseboat
The Headwater Fourteen [H-14] was designed and the prototype built in the Summer of 1985 to test the viability of using frameless, stressed skin construction to build a serviceable Whitewater drift boat.
Concept: The CCSF25 is a high performance offshore fishing and family boat, she has a classic running surface of 24 degree deadrise and 8.5' max beam. Wide chine flats for knocking down spray, integrated lifting strakes for high speed handling and directional control.
An open boat that rows with ease and swiftness and is stiff enough under sail to stand up to a breeze.
Construction: Carvel planked over steamed frames
Alternative construction: Lapstrake or strip
No lofting is required
Plans include 6 sheets
26′ Auxiliary KetchBased on a traditional fishing vessel type called a “Cowhorn” this design features an inboard engine and ballast keel.The arrangement provides two berths, a head and modest galley.
The first in the series of Hawks.The Sea Hawk, an excellent choice for the weekend warrior in all of us. Ideal for day paddles with the carrying capacity for overnight journeys.Good initial stability with exceptional secondary stability.
Meghan has a constant deadrise V-bottom hull with a capacity of 1-2 passengers and features for & aft flotation chambers. Her rig consists of a 16ft free standing mast, 9′5″ wishbone boom and 65 square ft sail.
Construction: Glued lapstrake plywood. Alternative construction: Traditional planking, cold molded, strip plank, epoxy-fiberglass. No Lofting required. Plans include 5 sheets.
Construction - Glued lapstrake clinker plywood.
No Lofting required.
Plans include 5 sheets with instructions.
Sail Area - 60 sq. ft.
This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.
Length: 18 feet, Beam: 8.25 feet, draft: about 1 foot.
21’ long, 16’ beam (reduces to 8'5" for trailering), strip plank construction, 850lbs with all ge
I built this PT 11 nesting dinghy from the CLC kit over this past winter, to replace a 9'6" Nutsh
