Plans & Kits

9 foot wooden catamaran

Glued-lap plywood rowing or sailing tender with plenty of capacity.

Construction: Glued lapstrake plywood.

No lofting required.

Plans include 8 sheets.

The Coot is a handy little yacht tender with a lot of capacity.

The baby of our pocket cruiser range, Design 077 is a remarkably robust and sea-kindly small cruising sail boat. Available as a gaff yawl or gunter rig cutter.She is very straightforward to build on five ring frames and a backbone, laminated up over the frames.

V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 11 sheets.Please note: gaff rig version’s mast measurements are taken by scaling from the plans.Notice the below de

MASH is a design I created for Woodenboat Magazine’s Sketchbook article, issue 275, July/August 2020. She is a 24ft power cruiser with a cuddy cabin designed in the lobsterboat style.

Bow and stern of English traditional narrowboat. Cutting files to produce a kit of steel parts for assembly. The midsection is a parralel box that can vary between 20 and 40ft. The midsection is produced by folding steel plate then adding the bow and stern.

Safe, dry, fast, and seaworthy V-bottomed inboard powerboat designed for carvel planking.

Construction: Carvel planked over sawn frames.

Alternative construction: Strip

Lofting is required.

Propulsion: 6 cylinder 350 cubic inboard.

Plans include 6 sheets.

Concept: The CCSF25 is a high performance offshore fishing and family boat, she has a classic running surface of 24 degree deadrise and 8.5' max beam. Wide chine flats for knocking down spray, integrated lifting strakes for high speed handling and directional control.