Plans & Kits

Centennial Spray 38

“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).

TRAWLER YACHT 585

Rustica 570 is a cabin motor boat ideal for coastal cruising and camping. It’s particularly suitable for river tourism in protected waters. The shallow V hull, semi-displacement, is designed for an outboard motor hosted inside the cockpit with a power range between 10 HP and 15 HP.

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise.

We designed a simple to build work boat with a vee-hull based on a proven work boat type, the Panga.

The Venture has a perky feel with a springier sheer line, compact length and the upright bow.

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).

MASH is a design I created for Woodenboat Magazine’s Sketchbook article, issue 275, July/August 2020. She is a 24ft power cruiser with a cuddy cabin designed in the lobsterboat style.

The Great Alaskan is a very versatile inshore/offshore powerboat with a seaworthy semi-dory style hull. These fiberglass/wood stitch-n-tape boat plans give the builder the freedom to adapt the cuddy, pilothouse, and cockpit layout to his preference.