Plans & Kits

Waverunner 24 - PLYWOOD Planing hull

Good performance with modest horsepower, a soft and predictable ride. I/O or outboard, 80-200hp.

Classic sport fishing boat in the style of the Abaco boats. A classic, smooth riding, variable deadrise hull finishing with 17 degrees deadrise at the transom.

Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker.

In the winter of 2012 a very good friend leant me an old copy of Nautical Quarterly. An article about Catboats caught my attention — I was and still am taken by their beautiful lines.I decided to design one with the aim of building it in the summer.

This exquisite launch leaves little wake at five knots. Her plans show both cold-molded and plank-on-frame construction. Construction: Cold-Molded or Carvel planked over steamed frames. Alternative construction: Lapstrake. Lofting is required. Plans include 5 sheets.

The PUCK reflects the spirit of the original class which was to create a boat used in regattas but also suitable for coastal cruising, easy to carry and inexpensive.

A comfortable small cruising boat with berths for either two or four and an alternate schooner rig.

Construction: Carvel planking over steamed frames

Lofting is required.

Plans include 10 sheets.

This is a 64 page construction guide for building a class legal PDRacer from PolySail International. The guide includes plans and is illustrated with multiple photographs taken as the prototype was being built over a period of six days.

Construction — Glued lapstrake clinker plywood. Alternative construction —Traditional plank, cold molded and strip plank. No Lofting required. Plans include 7 sheets with instructions. Sail Area — Lug 65 sq. ft. Sloop 84 sq. ft. Yawl 81 sq. ft.