Plans & Kits

Fast trailerable coastal cruiser

Please note: this design was formerly known as Pike.

Construction - Glue-lap-plywood flat bottom.

Alternative construction - Traditional plank.

No Lofting required.

Plans include 3 sheets with instructions.

Sail Area - Sprit 60 sq. ft.

This hypnotically striking canoe yawl ranks among the most admired designs of our time.

Construction: Carvel-planked over steam-bent frames

Alternative construction: Cold-molded

Lofting is required

Plans include 9 sheets

A versatile 4-metre open utility / runabout for river and inland lake use, built in taped-seam plywood.

The Rice Lake Skiff is sure to be a very useful boat at the cottage for fishing, rowing or just knocking about.

Attention Amateur and Professional Boat Builders!Bayside Marine Design has stock electrical plans for your boat project. All of the information and schematics you need to wire a new boat or re-wire an existing boat are in the package.

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p

This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.

Here is another little skiff inspired by a Chesapeake Bay working craft.

Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.