Plans & Kits

“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.

A versatile 4-metre open utility / runabout for river and inland lake use, built in taped-seam plywood.

21′ 2″ Inboard/outboard runabout, built of marine plywood.Several design options include center console, outboard as well as inboard/outboard.And, configurations also include different heights for the windshield.Construction: Plywood.Lofting is required.Plans include 5 sheets.

JUNIOR, designed to compete in Diecipiedi (10 Foot) Class (www.diecipiedi.it), is norrower and therefore less stable than other boats but it is one of the fastest monohulls of the class.

A specialized canoe for the racing enthusiast, This racing C1 is designed to the marathon racing rules and hence the unusual shape.

The Chesapeake Bay is home to many wonderful work boats, one of the most unique is the tiny Smith Island Crab Skiff. Our team race boat the “Twisted Oyster”, built and raced by a consortium of three friends, has been very successful.

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).

The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a car.

Concept: The CCSF25 is a high performance offshore fishing and family boat, she has a classic running surface of 24 degree deadrise and 8.5' max beam. Wide chine flats for knocking down spray, integrated lifting strakes for high speed handling and directional control.