Plans & Kits

Centennial Spray 38

Shoal-draft voyager

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise.

A stately 10′ rowing/sailing tender originally designed for my own first time build which is currently underway. I wanted an easy to construct boat, yet still retain the techniques and appearance of traditional lapstrake planking.

V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 11 sheets.Please note: gaff rig version’s mast measurements are taken by scaling from the plans.Notice the below de

IRC cruiser-racer

The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.

NEMAH features a stable, flat bottomed, sharpie type hull that can handle up to 3 passengers and a small outboard up to 5hp. Sides are ¼” plywood and the bottom is 3/8” plywood. A trussed gunnel rail insures hull stiffness.

Tom Cat is a shoal draft catboat of plank-on-frame construction, but strip construction would do as well.

Lofting is required.

Sail area is 120 sq. ft.

Plan includes 9 sheets.

Wynfall is a small but capable cruising boat -- although only 26' long, she has a waterline of almost 24', and displaces 9500 lbs.