Gypsy
The GYPSY 28 was the Woods Designs’ own cruising boat for five very successful years. It was designed as an easy-to-build budget ocean cruiser and many are now sailing in all corners of the world.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The GYPSY 28 was the Woods Designs’ own cruising boat for five very successful years. It was designed as an easy-to-build budget ocean cruiser and many are now sailing in all corners of the world.
Spray 52 is available as a Wood / Epoxy plan and full size frame patterns.
“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p
Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or recreation.
Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!
This exquisite launch leaves little wake at five knots. Her plans show both cold-molded and plank-on-frame construction. Construction: Cold-Molded or Carvel planked over steamed frames. Alternative construction: Lapstrake. Lofting is required. Plans include 5 sheets.
If we have to base ourselves on market demand before 2008, the two daysailers that we propose are very small. At that time, generally characterized by a continuous increase in boat size, it seemed as though a daysailer could not be less than 12 m, (even better if it exceeded 15 m).
These handsome, practical row boats were routinely built by Nova Scotia shipwright, Jim Smith in six days, painted and ready for the water.
Construction - Glued lapstrake plywood.
Alternative construction - Traditional, cold-molded and strip plank.
No Lofting required.
Plans include 8 sheets.
Sail Area - Lug 87 sq. ft.
Sloop 104 sq. ft.
Yawl 121 sq. ft.
Our version of the Optimist Pram, the "Club Racer"
Built by professional Vermont furniture maker. In exceptional condition.
This Venetian Gondola (K208) by Wooden Boat USA (2025) captures the elegance of traditional Venet