Oar / Paddle
The Open Boat
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
A roomy auxiliary sloop in a small package.
Construction: Carvel planked over steamed frames.
Alternative construction: Cold-molded or strip.
Lofting is required.
Plans include 11 sheets.
"PocketShip" is a small cruising sailboat of refined model, meant to sail well on all points, provide dry camping accommodations for one or two adults, and tow behind a four-cylinder car.
The lines for this canoe were taken from an original ‘Huron’ built in cedar/canvas by the Peterborough Canoe Company. It was a second grade model in a series of Cruiser canoes that measured from 16′ x 33″ to 18′ x 37″.
The JAM 8 is a true personal watercraft. While only 7 foot 4 inches long, it can carry up to 200 pounds. The JAM 8 is perfect for exploring flat water rivers, ponds and marshes.
The latest in Bill Garden’s idea of the perfect kid’s cruising boat. Simple enough to be put together in the garage, salty enough to daydream on, and safe enough as well. She’s quite a handsome double-ender, with a fixed keel. This is an “oh my” boat.Construction: Plywood planking over sawn frame
Steve Killing’s design is fast becoming well-known, in part due to the Endeavour being build in many a WoodenBoat School class, as well as being the featured boat in the Ted Moores book Kayakcraft.This is the boat for you, even if you have never paddled before.
MASH is a design I created for Woodenboat Magazine’s Sketchbook article, issue 275, July/August 2020. She is a 24ft power cruiser with a cuddy cabin designed in the lobsterboat style.
Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two
36’x12’8” Lobster boat built by Buxton Boats in Stonington, ME. Cedar over oak construction.
Peter Buxton completely restored 1927 Cutter. Long leaf yellow pine on black locust frames.
International Penguin
2008 Bristol Seacraft Penguin
11'5" LOA