Plans & Kits

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two

Kajoo Sport the skin on frame kayak. Design to 100% lashed, but it is possible to use also glue. Design by team Marcin Bober and Miroslaw Sziwa. Total weight of kayak 16Kg.

Plans available worldwide.
Kit in Europe (please ask for the price).

The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.

“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.

A new M80 has been launched in NL.
This tri was built by the ultimate wooden boat builder, Eef, a legend now 81 years has built several wooden multihulls is very happy with his new creation.
For more information on the M90, the M80 and M60 visit:

The longest runabout we offer, this 28' high-speed, triple cockpit runabout will also require highly skilled builders, but oh, the rewards...

Construction: Battened-seam planking over sawn frames.

Lofting is required.

Plans include 3 sheets.

You can enjoy paddling easier and funnier with less budget because it’s made of plywood, sectional and you can build one in a week.

24′ Chesapeake Bay Hampton FlattieL.O.A.: 24′ 2″L.W.L.: 22′ 8″Beam: 7′ 9″ Draft: 2′ ½″/3′ 9″Sail Area: 263 sq ftWeight: 2,500# (approx)Proportionately, this is the largest sharpie type known, and shows the maximum beam ratio successfully used in the sharpie type.

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.